How to Build a Lean-To on Side of House With Easy Step by Step

Building a lean-to on the side of your house can be a great way to add some extra storage space or create a covered area for outdoor activities. Here's how to do it:

You May like : Build lean to shed

Materials

• Pressure-treated lumber
• Roofing material
• Nails or screws
• Concrete mix
• Post anchors
• 2x4s
• Level
• Tape measure
• Saw
• Drill
• Hammer

Steps

1. Plan the lean-to

Determine the size and location of the lean-to. Choose an area on the side of the house that is flat and level, and where you can easily access it from the ground.

2. Build the frame

1. Mark the location of the posts on the ground, and dig holes for the footings. The footings should be at least 2 feet deep.
2. Mix the concrete according to the instructions on the bag, and pour it into the holes. Insert the post anchors into the wet concrete, and let the concrete cure for at least 24 hours.
3. Cut the pressure-treated lumber to size, and use it to create the frame for the lean-to. Attach the frame to the post anchors using nails or screws.

3. Install the roof

1. Cut the 2x4s to size, and use them to create the roof joists. Attach the joists to the frame using nails or screws.
2. Cut the roofing material to size, and install it on the roof joists. Use nails or screws to secure the roofing material to the joists.

4. Finish the lean-to

Once the roof is installed, you can add any finishing touches you like, such as painting or staining the frame, or adding shelves or storage hooks.

By following these simple steps, you can easily build a lean-to on the side of your house that will provide you with extra storage space or a covered area for outdoor activities.